Huawei SUN2000-12KTL - Resetting the System

SUN2000 (8KTL-28KTL)
User Manual
7 Man-Machine Interaction
Issue 10 (2017-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107
LCD
Procedure
3. Enter the correct user name and password
by pressing or , and press .
NOTE

The optional user names are Advanced User
and Special User. The initial password for
Advanced User and Special User is 000001. If
you forgot the password, contact Huawei
technical support for a dynamic password that is
effective only on the current day. Change the
password after login.

After the authentication is successful, the
system keeps the authentication information for
30 seconds. If you exit from the Maintenance
screen and log in again within 30 seconds, no
authentication is required.
4. Choose Alarm Reset, and press .
5. After alarms are reset, press .
----End
7.2.17 Resetting the System
You can reset the system on the LCD.
Context
The inverter automatically shuts down and restarts after a system reset.