Type Tools and Instruments
Crimping tool (model:
PV-CZM-22100)
Open-end wrench (model:
PV-MS-HZ or PV-MS)
Heat gun
Steel measuring tape Level Multimeter
Cable tie Vacuum cleaner
-
Person
al
protec
tive
equip
ment
(PPE)
Goggles Protective shoes Dust mask
Protective gloves Insulated gloves
-
4.3 Determining the Installation Position
Basic Requirements
● The inverter is protected to IP66 and can be installed indoors or outdoors.
● Do not install the inverter in a place where personnel are easy to come into
contact with its enclosure and heat sink, because these parts are hot during
SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual 4 Installation
Issue 18 (2024-03-10) Copyright © Huawei Technologies Co., Ltd. 26
To Next Page
Loading...
