Huawei SUN2000-3KTL-M1 Series User Manual

NO TICE
● When connecting to the SUN2000 directly from the mobile phone, keep the
mobile phone visible within 3 meters of the SUN2000 to ensure the
communication quality between the app and SUN2000. The distances are for
reference only and may vary with mobile phones and shielding conditions.
● When connecting the SUN2000 to the WLAN over a router, ensure that the
mobile phone and SUN2000 are in the WLAN coverage of the router and the
SUN2000 is connected to the router.
● The router supports WLAN (IEEE 802.11 b/g/n, 2.4 GHz) and the WLAN signal
reaches the SUN2000.
● The WPA, WPA2, or WPA/WPA2 encryption mode is recommended for routers.
Enterprise-level encryption is not supported (for example, public hotspots
requiring authentication such as airport WLAN). WEP and WPA TKIP are not
recommended because these two encryption modes have serious security
defects. If the access fails in WEP mode, log in to the router and change the
encryption mode of the router to WPA2 or WPA/WPA2.
Figure B-3 Quick settings
SUN2000-(3KTL-10KTL)-M1 Series
User Manual B Device Commissioning
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 122

Huawei SUN2000-3KTL-M1 Series Specifications

General

Max. efficiency	98.4%
European efficiency	97.8%
Rated AC output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Topology	Transformerless
Protection Degree	IP65
Number of MPP Trackers	2
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural Convection
Max. DC Power	4500 W
Max. Input Current	11 A
Power Factor	0.8 leading - 0.8 lagging
Max. apparent power	3300 VA
AC output voltage	220 V / 230 V / 240 V