Huawei SUN2000-3KTL-M1 Series User Manual

Type Tool
Heat shrink tubing Heat gun Cable tie Hydraulic pliers
PPE
Insulated gloves Protective gloves Dust mask
Safety shoes
Safety goggles
- - -
4.3 Determining the Installation Position
4.3.1 Environment Requirements
Basic Requirements
● The SUN2000 is protected to IP65 and can be installed indoors or outdoors.
● Do not install the SUN2000 in a place where personnel are easy to come into
contact with its enclosure and heat sinks, because these parts are extremely
hot during operation.
● Do not install the SUN2000 in areas with ammable or explosive materials.
● Do not install the SUN2000 at a place within children's reach.
● Do not install the SUN2000 outdoors in salt areas because it will be corroded
there and may cause re. A salt area refers to the region within 500 meters
from the coast or prone to sea breeze. The regions prone to sea breeze vary
depending on weather conditions (such as typhoons and monsoons) or
terrains (such as dams and hills).
● The SUN2000 must be installed in a well-ventilated environment to ensure
good heat dissipation.
● Recommended: Install the SUN2000 in a sheltered place or a place with an
awning.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 4 Installation
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 27

Huawei SUN2000-3KTL-M1 Series Specifications

General

Max. efficiency	98.4%
European efficiency	97.8%
Rated AC output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Topology	Transformerless
Protection Degree	IP65
Number of MPP Trackers	2
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural Convection
Max. DC Power	4500 W
Max. Input Current	11 A
Power Factor	0.8 leading - 0.8 lagging
Max. apparent power	3300 VA
AC output voltage	220 V / 230 V / 240 V