Huawei SUN2000-3KTL-M1 Series User Manual

3 Storage
The following requirements should be met if the SUN2000 is not put into use
directly:
● Do not unpack the SUN2000.
● Keep the storage temperature at –40°C to +70°C and the humidity at 5%–
95% RH.
● The SUN2000 should be stored in a clean and dry place and be protected
from dust and water vapor corrosion.
● A maximum of eight SUN2000s can be stacked. To avoid personal injury or
device damage, stack SUN2000s with caution to prevent them from falling
over.
● Periodic inspections are required during the storage. Replace the packing
materials if necessary.
● If the SUN2000 has been long-term stored, inspections and tests should be
conducted by qualied personnel before it is put into use.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 3 Storage
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 24

Huawei SUN2000-3KTL-M1 Series Specifications

General

Max. efficiency	98.4%
European efficiency	97.8%
Rated AC output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Topology	Transformerless
Protection Degree	IP65
Number of MPP Trackers	2
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural Convection
Max. DC Power	4500 W
Max. Input Current	11 A
Power Factor	0.8 leading - 0.8 lagging
Max. apparent power	3300 VA
AC output voltage	220 V / 230 V / 240 V