Huawei SUN2000-3KTL-M1 Series User Manual

● Updated 5.2 Installation Preparation.
● Updated 10.1 SUN2000 Technical Specications.
Issue 11 (2023-04-07)
● Updated 5.8.6 Connecting the NS Protection Signal Cable.
● Updated A Grid Code.
Issue 10 (2023-02-07)
● Updated 2.1 Product Introduction.
● Updated 5.2 Installation Preparation.
● Updated 5.8.2 Connecting the RS485 Communications Cable (Smart Power
Sensor).
● Updated 5.8.6 Connecting the NS Protection Signal Cable.
● Updated 7.1.3 Creating a PV Plant and a User.
● Updated 7.1.4 (Optional) Setting the Physical Layout of the Smart PV
Optimizers.
● Updated 7.2 Parameters Settings.
Issue 09 (2022-10-10)
● Updated 5.2 Installation Preparation.
● Updated 5.4 Connecting the AC Output Power Cable.
Issue 08 (2022-06-30)
● Updated 5.2 Installation Preparation.
● Add 7.2.1.4 Capacity Control.
● Updated 10.1 SUN2000 Technical Specications.
● Updated A Grid Code.
● Add F AI Energy Management Assistant (EMMA).
Issue 07 (2022-03-04)
● Updated 5.8.2 Connecting the RS485 Communications Cable (Smart Power
Sensor).
● Updated C Resetting Password.
● Updated D Rapid Shutdown.
Issue 06 (2021-12-20)
● Updated 7.1.3 Creating a PV Plant and a User.
● Updated 7.2.1 Energy Control.
● Updated 10.1 SUN2000 Technical Specications.
Issue 05 (2021-11-24)
Updated 10.1 SUN2000 Technical Specications.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual About This Document
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. v

Huawei SUN2000-3KTL-M1 Series Specifications

General

Max. efficiency	98.4%
European efficiency	97.8%
Rated AC output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Topology	Transformerless
Protection Degree	IP65
Number of MPP Trackers	2
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural Convection
Max. DC Power	4500 W
Max. Input Current	11 A
Power Factor	0.8 leading - 0.8 lagging
Max. apparent power	3300 VA
AC output voltage	220 V / 230 V / 240 V