Type Tool
Measuring tape Digital or bubble
level
Hydraulic pliers Heat shrink tubing
Heat gun Cable tie Diagonal pliers
N/A
PPE
Insulated gloves Safety goggles Dust mask
Safety shoes
Safety helmet Reective vest Protective gloves
N/A
UTXTC0005 is used to crimp metal cold forming contacts, while H4TC0003 is used to crimp
metal stamping forming contacts.
4.3 Determining the Installation Position
4.3.1 Environment Requirements
Basic Requirements
● Do not install the inverter in working or living areas.
SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual 4 Installation
Issue 11 (2024-02-02) Copyright © Huawei Technologies Co., Ltd. 27
To Next Page
Loading...
