Figure 4-14 Taking out a SUN2000
To prevent device damage and personal injury, keep balance when moving the
SUN2000 because it is heavy.
● Move the SUN2000 with the help of other three persons or using an
appropriate transportation tool.
● Do not use the ports and wiring terminals at the bottom to support any weight
of the SUN2000.
● When you need to temporarily place the SUN2000 on the ground, use foam,
paper, or other protection material to prevent damage to its enclosure.
Procedure
Step 1 If you can mount the SUN2000 onto the mounting bracket directly, go to Step 3
and then Step 5.
Step 2 If you cannot mount the SUN2000 onto the mounting bracket directly, go to Step
3 and then Step 6.
Step 3 Lift the SUN2000 and turn it upright.
To prevent device damage and personal injury, keep balance when raising the
SUN2000 because it is heavy.
Step 4 Run a lifting sling through the lifting eyes of the SUN2000.
SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual 4 Installation
Issue 11 (2024-02-02) Copyright © Huawei Technologies Co., Ltd. 37
To Next Page
Loading...
