7.1.3 Creating a PV Plant and a User
Figure 7-4 Creating a PV plant and a user
For details about how to use the site deployment wizard, see
FusionSolar App Quick
Guide
. During the FusionSolar app upgrade, scan the QR code to download the
corresponding quick guide according to the downloaded app version.
7.1.4 (Optional) Setting the Physical Layout of the Smart PV
Optimizers
● If smart PV optimizers are congured for PV strings, ensure that the smart PV
optimizers have been successfully connected to the SUN2000 before performing the
operations in this section.
● Check that the SN labels of smart PV optimizers are correctly attached to the physical
layout template.
● Take and save a photo of the physical layout template. Keep your phone parallel to the
template and take a photo in landscape mode. Ensure that the four positioning points in
the corners are in the frame. Ensure that each QR code is attached within the frame.
● For details about the physical layout of smart PV optimizers, see
FusionSolar App
Quick Guide
. During the FusionSolar app upgrade, scan the QR code to download the
corresponding quick guide according to the downloaded app version.
SUN2000-(2KTL-6KTL)-L1
User Manual 7 Man-Machine Interaction
Issue 04 (2021-04-01) Copyright © Huawei Technologies Co., Ltd. 64
To Next Page
Loading...
Need help?
General