Figure 4-12 Installing an anti-theft lock
----End
4.5.2 Support-Mounted Installation
Procedure
Step 1 Determine the positions for drilling holes using the marking-o template, and
then mark the positions with a marker.
Figure 4-13 Determining hole positions
Step 2 Drill holes using a hammer drill.
You are advised to apply anti-rust paint on the hole positions for protection.
SUN2000-(2KTL-6KTL)-L1
User Manual 4 System Installation
Issue 04 (2021-04-01) Copyright © Huawei Technologies Co., Ltd. 27
To Next Page
Loading...
Need help?
General