Huawei UPSJZ-T Series - Page 47

Display Description
Enable or disable the ECO function:
ENA: The ECO mode is enabled.
DIS: The ECO mode is disabled
(default).
● Maximum allowable voltage in ECO mode setting
Display Description
You can adjust the maximum input
voltage in ECO mode using ▲ and ▼.
13–24: The voltage can be set based
on the preset output voltage from +13
V AC to +24 V AC (+22 V AC by
default).
● Minimum allowable voltage in ECO mode setting
Display
Description
You can adjust the minimum input
voltage in ECO mode using ▲ and ▼.
13–24: The voltage can be set based
on the preset output voltage from –13
V AC to –24 V AC (–22 V AC by
default).
● Buzzer
o setting
UPSJZ-T-(1 kVA–3 kVA)
User Manual 4 Control Panel
2022-08-15 42