Display Description
Enable or disable the buzzer o
function:
ENA: The buzzer is muted.
DIS: The buzzer is unmuted (default).
● Automatic startup
Display Description
Automatic startup upon power-on:
ENA: The function of automatic
startup upon power-on is enabled.
DIS: The function of automatic startup
upon power-on is disabled (default).
The DHCP function setting, IP address display, subnet mask display, and gateway
display are available only when an SNMP card is congured. If no SNMP card is
connected, default values are displayed for the IP address, subnet mask, and
gateway. If an SNMP card is connected, the IP address, subnet mask, and gateway
need to be set on the WebUI of the SNMP card.
● DHCP function setting
Display
Description
Set the address allocation mode:
ENA: enabled
DIS: disabled (default)
● IP address display
UPSJZ-T-(1 kVA–3 kVA)
User Manual 4 Control Panel
2022-08-15 43
To Next Page
Loading...
Need help?
General