PSP8620311
Rev. E
2
Warnings
IMPORTANT
These installation, operation and maintenance instructions do not claim to cover all details or variations in
equipment. Nor do they provide for all possible conditions encountered while installing, operating or maintain-
ing this equipment. If further information is desired or needed to address any particular installation, operation
or maintenance problem not covered in this document, contact your authorized factory representative.
The information in this document does not relieve the user from exercising good judgment in selecting equip-
ment for suitability of application. Nor does it relieve the user from using sound practices in installation, opera-
tion and maintenance of the equipment purchased.
Note: Because Hubbell has a policy of continuous product improvement, we reserve the right to change de-
sign and specications without notice. Should a conict arise between the general information in this docu-
ment and the contents of drawings or supplementary material, or both, the latter shall take precedence.
QUALIFIED PERSON
For the purpose of this manual, a qualied person is:
(a) familiar with the installation, construction or operation of the subject equipment and the hazards
involved with its installation, operation and maintenance.
(b) trained to de-energize, clear, ground, and tag circuits and equipment in accordance with established
safety practices.
(c) trained in the proper care and use of protective equipment such as rubber gloves, hard hat, safety
glasses or face shields, ash clothing, etc., in accordance with established utility safety practices.
(d) trained to render rst aid.
Electrical equipment contains hazardous voltages. Con-
tact with these hazards will cause death, severe personal
injury or damage equipment.
Only qualified personnel shall install, operate and maintain this equipment.
Always properly ground equipment and lock out electric power (de-en-
ergize) before maintenance. Using non-specified/unauthorized parts or
components to repair equipment, or tampering with safety devices/systems
will result in dangerous conditions which can cause death, severe personal
injury or damage to equipment. Take note of and follow all safety instructions
contained in this installation, operation and maintenance manual.
SUMMARY
The information in this document does not claim to cover all details or variations in equipment, nor to provide
for every possible contingency encountered with installation, operation, or maintenance. Should further infor-
mation be needed or problems arise that are not covered suciently, contact your factory representative.
The contents of this document are not part of, nor do they modify, any prior or existing agreement, commit-
ment or relationship. Hubbell Power Systems, Inc. terms and conditions of sale constitute the entire obliga-
tion of Hubbell Power Systems, Inc. The warranty in the terms and conditions of sale is the sole warranty of
Hubbell Power Systems, Inc. Any statements in this document do not create new warranties or modify any
existing warranty.
!
DANGER
To Next Page
Loading...
