EasyManuals Logo

Humminbird HELIX CHIRP GPS G2N User Manual

Humminbird HELIX CHIRP GPS G2N
330 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
154
Navigation Alarms Overview
N A O
When an alarm is turned on, an alert will sound or display on the control head to indicate the threshold has been exceeded. When
you set the Off Course Alarm, Arrival Alarm, and Drift Alarm, the limits are shown on the Chart View.
Turn on Alarms and Adjust Settings
1. Main Menu: Press the MENU key twice. Select the Alarms tab.
2. Select an alarm menu. Press the RIGHT or LEFT Cursor keys to adjust the threshold.
Off Course Alarm
Sets how far the boat can move off course during navigation before an alarm will be triggered.
GPS required.
Arrival Alarm
Sets how close the boat must be to the destination waypoint before the alarm will be triggered.
GPS required.
Drift Alarm
Sets how far the boat can move from its anchored position outside the drift alarm perimeter
before an alarm will be triggered. GPS required.
Off Course Alarm and Arrival Circle
arrival circle
o course limits

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Humminbird HELIX CHIRP GPS G2N and is the answer not in the manual?

Humminbird HELIX CHIRP GPS G2N Specifications

General IconGeneral
Display Size7 inches
Waypoints2, 500
Routes50
Track Points50, 000
NetworkingEthernet
Display TypeColor TFT
Down ImagingYes
Side ImagingYes
ChartplottingYes
LakeMaster CompatibilityYes
AutoChart LiveYes
NMEA0183Yes
NMEA2000Yes
Power Output500 Watts (RMS)
Storage Temperature-20°C to 70°C
Water RatingIPX7
Display Resolution800H x 480V
SonarCHIRP Digital Sonar
GPSInternal
Display Pixel Matrix800H x 480V
Card SlotsmicroSD
Max Depth1500 ft
Frequency83/200 kHz & 455/800 kHz

Related product manuals