Name: Humminbird HELIX CHIRP GPS G2N
Brand: Humminbird
Rating: 4 (1 reviews)

To Next Page

To Previous Page

204

AutoChart Live

3. S R

Use the instructions in this section to stop recording. Your map is automatically saved to the control head (internal) or to the

ZeroLine Map Card if it is installed.

1. Chart X-Press Menu: With a Chart View displayed on-screen, press the MENU key once.

2. Select AutoChart. Press the RIGHT Cursor key.

3. Select Record.

4. Select Oﬀ.

If you do not have a ZeroLine Map Card installed, and the control head storage (8 hours) is reached, the control head

will provide a dialog box to Conﬁrm or Clear Data. To save your map and turn oﬀ recording, select Conﬁrm. To erase

your map and start over, select Clear Data.

C D

If you see an irregularity in the data (such as lost depth), it can be deleted. Recording must be turned oﬀ while you correct the data.

1. Chart X-Press Menu: With a Chart View displayed on-screen, press the MENU key once.

2. Select AutoChart. Press the RIGHT Cursor key.

3. Select Show Raw Data. Press the RIGHT Cursor key.

4. Press the +ZOOM key to see individual data points.

5. Exit the AutoChart Menu by pressing the EXIT key three times and then move the cursor over a data point.

6. From the AutoChart menu, select Delete. Press the RIGHT Cursor key.

Selecting a Data Point

cursor selecting

a data point

Questions and Answers:

Need help?

Do you have a question about the Humminbird HELIX CHIRP GPS G2N and is the answer not in the manual?

Humminbird HELIX CHIRP GPS G2N Specifications

General