Name: Humminbird HELIX CHIRP GPS G2N
Brand: Humminbird
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Down Imaging Sonar

N  D I V

To mark waypoints and start navigation, the control head must have a GPS Fix from a connected or internal GPS receiver. See

Getting Started for more information.

Mark a Waypoint

You can mark a waypoint at the boat position or the cursor position. Waypoints are saved to the Waypoint Management dialog box

(see Manage your Navigation Data).

Mark a Waypoint at the Boat Position

1. Press the MARK key.

Mark a Waypoint at the Cursor Position

1. Use the Cursor Control key to move the cursor to a position on the view.

2. Press the MARK key twice.

Press Twice to

Mark a Waypoint

Move the Cursor

cursor

digital

readouts

cursor depth

Marking a Waypoint at the Cursor Position

cursor

depth below cursor distance to cursor position bearing to cursor position

Questions and Answers:

Need help?

Do you have a question about the Humminbird HELIX CHIRP GPS G2N and is the answer not in the manual?

Humminbird HELIX CHIRP GPS G2N Specifications

General