Name: Humminbird HELIX CHIRP GPS G2N
Brand: Humminbird
Rating: 4 (1 reviews)

To Next Page

To Previous Page

166

Routes

R

Routes link two or more waypoints together to create a path for navigation. A route represents your intended navigation and shows

the shortest path from each data point to the next. The distance between each waypoint is a route leg. You can save 47 routes

(with 50 waypoints each) to the control head.

WARNING! You should always be aware of your surroundings and watch for any potential obstacles.

Create a Route and Start Navigation

Use the instructions in this section to connect waypoints and start navigation immediately. To create a route from the Waypoint

Management dialog box, see Manage your Navigation Data.

1. Use the Cursor Control key to move the cursor to a waypoint or position on the chart.

2. Press the GOTO key twice.

3. Repeat steps 1 and 2 to add more waypoints to the route.

Press Twice to

Start Navigation

Move the Cursor

Creating and Navigating a Route

2nd

waypoint

route leg

north up

indicator

chart orientation1st waypoint current trackcourse projection line

route start

point

Questions and Answers:

Need help?

Do you have a question about the Humminbird HELIX CHIRP GPS G2N and is the answer not in the manual?

Humminbird HELIX CHIRP GPS G2N Specifications

General