Hunter Douglas PowerView Pebble - Getting Started with the PowerView Hub

– 26 –
GETTING STARTED WITH THE HUB
VIDEO INSTRUCTION
PowerView Hub and Repeater Components
Ethernet Port
Connects ethernet cable
to a router.
Power
Plug USB cable in to port
to power the Hub.
Test
Sends signal to
repeaters to test.
Data Erase
Press for 6 seconds to erase
all data stored on the Hub.
Hub Back
Repeater
Repeater
Power Supply
PowerView Hub
PowerView Hub
Power Supply
Ehternet Cable
USB Power Supply Cable
RS232
Plug allows connection
to Home Automation.
Reset
Pressing the reset button
reboots the system.
4