INSTALLATION
14
Install the Blind
Mount the Headrail
Décor
®
and Lightlines
®
blinds (Residential Application): Place the headrail in the
hidden installation brackets so that the inside flange rests on the hidden installation
bracket hook and the rear bottom corner rests on the tab.
Celebrity
®
blinds (Residential Application): Place the headrail in the hidden
installation brackets so that the front lip rests on the hidden installation bracket hook and
the rear bottom corner rests on the tab.
Celebrity blinds (Commercial Application): Place the headrail in the beveled box
installation brackets so that the back lip slides under the front lip of the beveled box
installation brackets. Push the headrail against the back of the beveled box installation
brackets. Close the side hinge of each beveled box installation bracket until they snap
securely in position.
The blind should hang on the installation brackets without being held in place.
Tilt the headrail up and push it back until it is flush against the top of the installation
brackets. Tighten the locking screw on all installation brackets to hold the blind securely
in place.
Proceed to “Complete the Installation” on page 15.
Back Lip of Rail
Fits Behind Leg
Inside
Flange
Bracket Hook
Tab
Tighten Locking Screw
Front
Lip
Décor and Lightlines blinds
(Residential Application)
Celebrity blinds
(Residential Application)
Bracket Hook
Tighten Locking Screw
Tab
Celebrity blinds
with beveled box
installation brackets
(Commercial Application)
Installation Brackets and Headrail Profiles
To Next Page
Loading...
Need help?
General
