GETTING STARTED
3
Thank you for purchasing Hunter Douglas horizontal blinds. With proper installation,
operation, and care, your new blinds will provide years of beauty andperformance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.
Tools and Fasteners Needed
Ballpoint pen
Flat blade and Phillips screwdrivers
Level (laser level is recommended)
Measuring tape and pencil
Power drill,
3
⁄
32
" drill bits, and
1
⁄
4
" hex driver (or socket wrench with
1
⁄
4
" hex socket)
In addition, you will need fasteners designed to work with your specific mounting surface(s).
#6 Hex Head Screws (Provided). Two 1
1
⁄
2
" screws are provided per installation
bracket.
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws
long enough for a secure attachment.
Speed Nuts and Screws (Provided). Extension brackets come with screws and
speed nuts.
Unpack the Blind
Remove the blind from the package. Keep the packaging until the blind operates to your
satisfaction.
Refer to the packing list and check for all necessary parts.
Contents of your hardware package may vary depending upon the options chosen.
Speed Nut
and Screw
(Two Provided with
#6 x 1
1
∕
2
"
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)