INSTALLATION
5
Mount the Installation Brackets — Inside/Ceiling Mount for
Standard Shades
IMPORTANT: To ensure each bracket is mounted properly, the white tab should be toward
the room.
■ Mark 1
1
/
2
" to 3" from each jamb for bracket location.
➤ If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■ Center the brackets on your marks and mark the screw holes.
➤ The minimum depth required for mounting is 1
5
/
8
". For fully
recessed mounting, the mounting depth varies with the
diameter of the fabric roll when the shade is fully raised.
■ Use a
3
/
32
" drill bit to drill holes for the mounting screws.
■ Attach the installation brackets using the screws provided.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to eachother.
WARNING: Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
Proceed to “Install the Shade” on page 9.
Space Evenly
Jamb Jamb
Space Evenly 1
1
/
2
" to 3" 1
1
/
2
" to 3"
1
1
/
2
" to 3"
To Next Page
Loading...
