INSTALLATION
7
Mount the Installation Brackets — Inside/Ceiling Mount for Cassette
Shades
■ Mark 2" in from each jamb for bracket location.
➤ If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■ Center the brackets on your marks and mark the screw holes.
➤ The minimum depth required for mounting is 2
1
/
4
". For fully recessed mounting, 4" is
required.
■ Use a
3
/
32
" drill bit to drill holes for the mounting screws.
■ Attach the installation brackets using the screws provided.
IMPORTANT: The front edges of the installation brackets must
be level and aligned to eachother.
WARNING: Product is heavy. Mount into wood/metal
studs or into concrete with concrete anchors. Drywall
anchors are not recommended.
Proceed to “Install the Shade” on page 9.
Space Evenly
Jamb Jamb
Space Evenly
2"
2"
2"
To Next Page
Loading...
