INSTALLATION
6
➤
A minimum 1
1
⁄
8
" flat vertical surface isrequired for the installation brackets. Extension
brackets require 1
1
⁄
4
".
➤
The top of the installation brackets or extension brackets should be at the desired
height. The brackets should be level and aligned to each other.
CAUTION: The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION: Use drywall anchors
when mounting into drywall.
■
Attach the installation or extension
brackets using the screws provided.
IMPORTANT: The top of the
installation brackets or extension
brackets must be level with their
front edges aligned.
IMPORTANT: The minimum spacer blocks required for a headrail-mounted rechargeable
battery wand will vary depending on the shade size. Refer to the chart below for spacer
block quantity.
1
1
∕
8
"
Extension
Bracket
1
1
∕
4
"
Rechargeable
Battery Wand
1
∕
2
"
1
∕
4
"
Headrail-Mounted Rechargeable
Battery Wand
Spacer Block
Quantity
Spacer Block
Size
Standard Shades 1
1
⁄
4
"
XL Oversized Shades 1
1
⁄
2
"
To Next Page
Loading...
