- 10 -
ENGLISH
OPERATION INSTRUMENTS
SPEED/ODO DISPLAY MODE
SPEED displays the speed in KPH or MPH. The displayed figure
cannot be cleared.
ODO displays the kilometers or miles traveled. The displayed
figure cannot be cleared.
+ button no function
– button no function
press the MODE button to change to the next mode
press and hold the MODE button 3 seconds to change to the next
mode
SPEED/MAX DISPLAY MODE
MAX displays the maximum speed. It is always active.
+ button no function
– button no function
press the MODE button to change to the next mode
press and hold the MODE button 3 seconds to reset the MAX
figure to 0
SPEED/LAP DISPLAY MODE
LAP displays the stopped lap time in hours, minutes and seconds.
+ button Starts and stops the stop watch. The lap time is
not reset to 0.
– button Stops the running stop watch, stores the lap time
and restarts the stop watch. The time is reset to 0.
A total of 10 lap times can be stored and read in
the SPEED/LAP display mode. To clear all of the
stored lap times, hold the MODE button for 3
seconds in the SPEED/LAP mode.
press the MODE button to change to the next mode. If no lap time
is stored or the motorcycle is driving, the LAP/LAP mode will be
skipped.
press and hold the MODE button 3 seconds to reset the LAP figure
and all stored lap times to 0
To Next Page
Loading...
Need help?
General
