OPERATION INSTRUMENTS
- 8 -
INDICATOR LAMPS
The green control lamp (1) flashes in the same rhythm as
the flashing indicator when the indicator is working.
The blue control lamp (2) lights up when the high beam is
on.
STARTER BUTTON
Pushing the black starter button (3) will actuate the E-starter.
EMERGENCY OFF SWITCH (AUSTRALIA)
The red emergency-OFF switch (4) is arranged adjacent to the
throttle grip.
In this position, the E-starter is operational and the
engine can be started.
In this position, the E-starter and ignition circuits are
interrupted. The E-starter cannot be actuated, and the
engine will not start, not even if you attempt to start it
with the kickstarter.
Pushing the black starter button (5) will actuate the E-starter.
ELECTRONIC SPEEDOMETER
The electronic speedometer display is activated as soon as the
engine is switched on and the motorcycle starts to move.
The engine must be started in order for the speedometer to be
supplied with electricity from the generator. An impulse must be
received from the wheel sensor to activate the display; the front
wheel must turn at least one time.
TEST
All of the display elements will light up for 1 second for the func-
tion test.
ENGLISH
1
2
3
4
5