HUSABERG FE 450 User Manual

DISMOUNTING AND MOUNTING THE ENGINE
B
8
– Mount both radiator hoses and tighten the hose
clamps (1).
– Connect the overflow hose (2) and attach to the frame
with cable clips.
–Connect the battery cables.
– Mount the tank and tighten the two bolts (4) on the
side of the spoiler.
– Connect both fuel hoses and open the fuel taps.
– Mount the air filter (5) and screw tight.
–Mount the seat.
– Lift the motorcycle off the engine work stand.
–Bleed the cooling system.
– Check the engine oil level.
– Check the oil level and cooling liquid level again after
a short, cautious test ride.
1
1
1
2
3
4

HUSABERG FE 450 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	449.3 cc
Bore x Stroke	95 mm x 63.4 mm
Compression Ratio	11.8:1
Starter	Electric starter
Transmission	6-speed
Lubrication	Pressure lubrication with 2 oil pumps
Cooling	Liquid cooling
Fuel System	Keihin EFI
Ignition	Digital CDI