English – 11
Pos. Description Used for Order No.
1 Assembling tool Assembling the sealing ring 577 70 16-01
2 Piston stop Lock crankshaft 575 29 36-01
3 Pressure tester Pressure testing cylinder 576 38 48-01
4 Test spark plug Checking the ignition module 502 71 13-01
5 Assembly kit, piston Assembling the piston 502 50 70-01
6 Mandrel Dismantling the ywheel 502 51 94-01
7 Feeler gauge Setting, ignition module 514 24 41-01
8 Hook for fuel lter Lifting out the fuel lter 502 50 83-01
9 Assembly pliers Assembling the spark plug protector 502 50 06-01
10 Pressure gauge Pressure testing 531 03 06-23
11 Assembly xture Securing the chain saw 502 51 02-01
12 Guide Brake spring out or in 513 63 70-01
13 Flywheel tool Remove the ywheel 504 91 08-03
14 Torx wrench T20/T25/T27 578 28 90-01
15 Adjustment screwdriver Adjustment of the carburettor 513 63 56-01
16 Adjustment screwdriver Adjustment of the carburettor 530 03 55-60
17 Cover, exhaust Cover plate sealing exhaust port 502 50 71-01
18 Rubber wedge Cover plate sealing intake port 502 54 11-01
19 Mounting kit for bearings Dismantling and assembling bearings 577 71 44-02
and sealing ring and sealing ring
19a Dismantling tool Dismantling bearings and sealing ring 576 66 64-01*
19b Assembling tool Assembling the sealing ring 576 95 56-01*
19c Dismantling tool Dismantling bearings and sealing ring 576 95 46-01*
19d Assembling tool Assembling bearings 576 95 45-01*
19e Dismantling tool Dismantling bearings and sealing ring 725 23 80-51*
Service tools
The tools listed here are the service tools required for this model of chain saw. In addition to these tools, a
normal kit of hand tools is required.
18
19a 19b
19c 19d
19e
19
* Included in mounting kit 577 71 44-02 and can not be ordered separately.
To Next Page
Loading...
