Husqvarna T525 - Starting the Product; Prepare for Cold Engine Start; Prepare for Warm Engine Start

12 – English
5 Service data
Service data
Key
The numbers by the components to be assembled with screws
state the tightening torque in Nm.
p = Lubricate with two-stroke oil.
n  = Lubricate with grease.
g = Apply thread lock: Three bond #1322 or Locktite #262.
c  = Apply thread lock: Three bond #1342 or Locktite #242.
O = Apply liquid gasket #1217F.
T27
1.0 ~ 2.0 Nm
T275.9 ~ 7.8 Nm
T275.9 ~ 7.8 Nm
T272.5 ~ 3.9 Nm
T27
T201.2 ~ 2.5 Nm
Min 20 Nm
T27
T27
2.0 ~ 2.9 Nm
T275.9 ~ 7.8 Nm
T272.9 ~ 3.9 Nm
12 mm14.7 ~ 18.6 Nm
16 mm7.9 ~ 10.8 Nm
1.0 ~ 1.5 Nm
1.0 ~ 1.5 Nm
T27
2.5 ~ 3.9 Nm