80 Digital Refractor CDR-9000
: Thumbnail window page down
: [ADD] button
: [DEL] button
: select to each step
The option elements for designing a user-defined program in the left-top side o
f the window are as follows:
- Test: the chart of the system test to apply. If ‘Test’ item is changed, relate
d Chart, Data Element, Cross Cylinder, Fogging and Auxiliary Lens items wi
ll be changed at a time if possible. To select a test for a step in the user
-designable program, you may press a Chart button directly, or select one
by turning the dial or from the test selection menu.
-
Test Mode (Dist.): assigns whether near or far distance. Press the combo-b
ox button of the touch screen or the dial to change near or far distance.
-
Data Element: assigns SPH, CYL, AXS, ADD, VA, BIBO, BDBU or ADDVA. Pre
ss the combo-box button of the touch screen or press the [S], [C], [A], [A
DD], [VA], [BIBO], [BDBU] or [N ADD VA] button to select this.
To Next Page
Loading...