Page 1-14 MAXX 450D/470D/Diesel
HydraMaster Corporation
Correct Installation (cont.)
• Connecting the battery
• Checking the pump, vacuum blower and engine oil levels prior to
starting the unit
• Starting the unit to check engine and see that all systems function
normally
• Checking all hoses, wands, etc. for correct operation.
NOTE: Under certain circumstances, machines may require modification for
optimal performance. Cerain environmental conditions may require engine
modification or control function calibration.
Training Shall Include:
• A thorough review of the operation manual with purchaser;
• Instruction and familiarization in:
1. How to correctly start up and shut down the unit
2. How to correctly clean with the unit
3. Where and how often to check and change component oil levels
4. How the unit’s systems work
5. How to troubleshoot the unit
6. How to do basic repairs
7. Safety precautions and their importance
8. Freezing damage and how to avoid it
9. Hard water damage and how to avoid it
10. Cleaning the orifices and how they function in the system
• A thorough review of the unit warranty and warranty procedures.
• A thorough review of hard water precautions and warnings.
• How to determine hard water areas.
• Use of water softening systems.
To Next Page
Loading...