HydraMaster MAXX 450D - Fig

MAXX 450D/470/Diesel Page 1-29
HydraMaster Corporation
Item Part Number Description Qty
Frame Assembly Parts List
31 000-143-126 Screw, #10-24UNC x 0.50" Lg. Hex Head 4
32 000-033-044 Clamp, 3/8" Tube 3
33 000-094-009 Nut, 1/4"-20UNC Hex Nylock 2
34 000-033-120 Clamping Unit, HC-10-1 Single Position Unit 2
35 000-174-003 Washer, 1/4" Flat 2
36 000-141-033 Rod, Heat Exchanger Strap - Retainer 2
37 Fig. 1-24 Assembly, Diverter Valve Actuator - Maxx 450D/470D 1
38 000-143-004 Screw, 1/4"-20UNC x 1.50" Lg. Hex Head 2
39 000-174-021 Washer, 3/8" Lock 2
40 000-143-017 Screw, 3/8"-16UNC x 0.75" Lg. Hex Head Grd. 8 2
41 000-143-025 Screw, 3/8"-16UNC x 1.25" Lg. Hex Head Grd 8 1
42 000-094-100 Nut, 3/8"-16UNC Hex Nylock 1
43 Fig. 1-18 Assembly, Water Box - Poly - Maxx 1
44 000-174-004 Washer, 5/16" Flat 4
45 000-174-057 Washer, 3/8" Lock 4
46 000-105-012 Plate, Machine Serial I.D. 1
47 000-027-034 Cap, Frame End - Modified - Maxx/CTS 450 2
48 000-033-057 Clamp, 1" Cushion Loop 3
49 000-094-034 Nut, #10-24UNC Nylock 1
50 000-140-001 Rivet, 1/8" x 1/4" Aluminum 2