MAXX 450D/470D/Diesel Page 1-3
HydraMaster Corporation
Precautions
A
lthough this unit has been factory adjusted, it may require additional adjust-
ments to achieve optimum performance, for instance altitude may require
carburetor adjustment and ambient temperatures may require heat control adjust-
ment. When required, consult an authorized representative.
THROUGH-FLOOR DRILLING: Be cautious when drilling holes through the van floor.
Many vans have critical components mounted directly below the van floor that
could be damaged by a misplaced drill bit. (See Product Support Bulletins 92102,
94062 and 94063 at the end of the manual.)
ENGINE COOLING: Units employing internal combustion engines must not be
enclosed within a van with doors and windows closed. Excessive temperatures within
the engine will result in premature engine failure and a compromise of
applicable warranty.
LEVEL OPERATION: During operation, van or trailer must be parked on level ground
not to exceed + or - 10 degrees. Failure to insure proper leveling may prevent
proper internal lubrication of engine, vacuum and/or high pressure components.
MOVING PARTS: Never touch any part of the machine that is in motion. Severe
bodily injury may result.
CAUTION
!
CAUTION
!
CAUTION
!
WARNING
!
To Next Page
Loading...