Hypertherm HyDefinition HD3070 - PAC184 Machine Torch Assemblies

HD3070 with Automatic Gas Console Instruction Manual 2-9
16
SPECIFICATIONS
PAC184.02
0.059 - 0.79"
(1.5 - 2.0 mm)
0.0355"
(9.0 mm)
Figure 2-3 PAC184 Torch Assembly
0.41" (1.04 mm)
0.20" (0.51 mm)
1.05"
(2.67 mm)
70
90
PAC184.01
0.02" (0.05 mm)
PAC184 Machine Torch Assemblies (028839, 128199)
Maximum cutting thickness...............................................1/4 inch (6.4 mm)
Maximum current at 100% duty cycle ...............................30 amps
Torch Cooling Requirements:
Coolant..............................................................................Propylene glycol/deionized water/benzotriazole
(refer to Section 3, Torch Coolant Requirements
for specifications, warning, and caution)
Flow Rate..........................................................................≈ 1 gallon/minute (3.8 liters/minute)
Pressure ...........................................................................150 psi (10.2 bar)
Dimensions and Weight:
Diameter............................................................................1.75 inches (44 mm)
Length ...............................................................................3.44 inches (88 mm)
Weight...............................................................................1 pound (0.45 kg)