Hypertherm HyDefinition HD3070 - Power Supply to Automatic Gas Console Interconnections

3-22 HD3070 with Automatic Gas Console Instruction Manual
16
INSTALLATION
Power Supply to Automatic Gas Console Interconnections (Figure 3-16)
Gas Console Cable (Figure 3-17)
1. Connect the cable plug marked 1X4 to the receptacle marked 1X4 on the rear of the power supply.
2. Connect the other end of the cable marked 3X1 to the receptacle marked 3X1 on the gas console.
Gas Console Control Cable (Figure 3-18)
1. Connect the cable plug marked 1X3 to the receptacle marked 1X3 on the rear of the power supply.
2. Connect the other end of the cable marked 3X2 to the receptacle marked 3X2 on the gas console.
8
7
1X3
Gas Console
Control cable
8
1X4
Gas Console
Control cable
7
3X2
Gas Console
Control cable
8
3X1
Gas Console
Control cable
7
Figure 3-16 Power Supply to Gas Console Interconnections
EMI Filter used
on 220/380/415V
CE units only
Power Supply
Automatic Gas
Console