Hypertherm HyDefinition HD3070 - PAC186 Machine Torch Assemblies

2-10 HD3070 with Automatic Gas Console Instruction Manual
18
SPECIFICATIONS
PAC186 Machine Torch Assemblies (128101, 128102)
Maximum cutting thickness...............................................1/2 inch (12.7 mm)
Maximum current at 80% duty cycle .................................100 amps
Torch Cooling Requirements:
Coolant..............................................................................Propylene glycol/deionized water/benzotriazole
(refer to Section 3, Torch Coolant Requirements
for specifications, warning, and caution)
Flow Rate..........................................................................≈ 1 gallon/minute (3.8 liters/minute)
Pressure ...........................................................................150 psi (10.2 bar)
Dimensions and Weight:
Diameter............................................................................1.75 inches (44 mm)
Length ...............................................................................3.44 inches (88 mm)
Weight...............................................................................1 pound (0.45 kg)
0.20" (0.5 mm)
0.18" (0.46 mm)
1.06"
(2.69 mm)
80
PAC186.01
0.04" (0.1 mm)
0.58"
(1.47 mm)
PAC186 Torch Assembly