Hypertherm HyPrecision Predictive P-50S User Manual

Safety and compliance SC-15
Product stewardship
Product stewardship
Hypertherm maintains a global regulatory management system to make sure that products comply with regulatory
and environmental requirements.
National and local safety regulations
National and local safety regulations shall take precedence over instructions supplied with the product. The
product shall be imported, installed, operated, and discarded in compliance with national and local regulations
applicable to the installation site.
Certification test marks
Certified products are identified by 1 or more certification test marks from accredited testing laboratories. The
certification test marks are on or near the data plate.
Each certification test mark means that the product and its safety-critical parts conform to the national safety
standards as reviewed and determined by that testing laboratory. Hypertherm puts a certification test mark on its
products only after that product is manufactured with safety-critical parts that have been approved by the
accredited testing laboratory.
Once the product has left the Hypertherm factory, the certification test marks are invalid if any of these events
occurs:
 The product is modified in a manner that causes danger or does not conform with the applicable
standards.
 Safety-critical parts are replaced with unapproved spare parts.
 Assembly is unauthorized.
 An accessory that uses or generates dangerous voltage is added.
 A safety circuit or other feature that is designed into the product as part of the certification has been
tampered with.
The Conformité Européene (CE) mark affixed to a product signifies the manufacturer’s declaration of conformity
to applicable European directives and standards.
Only those versions of Hypertherm products with a CE mark on or near the data plate have been tested for
compliance with the applicable European directives, such as the Low Voltage Directive, the Electromagnetic
Compatibility Directive, and the Machinery Directive.
To see the Declaration of Conformity in English and other languages:
1. Go to www.hypertherm.com/docs
.
2. Select Waterjet Family in the Product/Product type dropdown list.
3. Select Regulatory in the Category dropdown list.
The navigation instructions can change without notice.

Hypertherm HyPrecision Predictive P-50S Specifications

General

Brand	Hypertherm
Model	HyPrecision Predictive P-50S
Category	Water Pump
Language	English