54 HyPrecision Predictive waterjet pump Operator Manual 810120
4 – Operation
Operation
Safety
Refer to the instruction manual. Read and understand all of the safety guidelines in this manual.
DANGER
A waterjet is a cutting tool. Keep away from high-pressure streams and leaks. Pressurized fluid
can cause injuries.
A high-pressure injection injury is a surgical emergency. Get medical treatment immediately for all
high-pressure waterjet injuries.
Delayed treatment can cause injuries or death. Abrasive waterjets eject a mixture of water and
abrasive materials that can be injected into body tissues, leading to a dangerous infection.
DANGER
D
ANGEROUS VOLTAGE/RISK OF SHOCK
To reduce the risk of injuries or death, wear approved protection and obey safety
recommendations when doing work with electricity.
DANGER
Do not stand in line with high-pressure fittings when operating this equipment. If a high-pressure
fitting fails, it can cause a stream of water or hydraulic fluid to eject from the system with force.
WARNING
Keep a restricted-access area clear that larger than the maximum movement range of the cutting
equipment’s moving parts.
WARNING
Personal protective equipment is recommended. If you do not use personal protective equipment,
there is a risk of injury or death.
WARNING
Permit only approved personnel to operate, maintain, and repair this machinery.
WARNING
Do not leave waterjet cutting equipment unattended while it is operating.
WARNING
Do not operate the pump without the shaft access cover and all other safety devices correctly
installed.
WARNING
Make sure that all connections, fasteners, locking devices, hoses, and fittings are tight before
operation.
WARNING
Do not block or remove warnings, cautions, or instructions.
CAUTION
Do not touch a hot surface.
Water leaking from a high-pressure fitting or the bleed-down valve can be hot.
CAUTION
High-pressure water can cause eye injuries. Wear approved eye protection when operating or
doing work near this equipment.
To Next Page
Loading...
Need help?
General
