HyPrecision Predictive waterjet pump Operator Manual 810120 191
8 – Pump specifications
Pump specifications
Steel JIC 37°
SAE O-ring boss
Lubricate the threads of steel JIC fittings with hydraulic fluid.
1/16-inch
dash size
Minimum Maximum
N∙m lbf ∙ ft N∙m lbf ∙ ft
-04 14 10 15 11
-06 23 17 26 19
-08 46 34 52 38
-10 68 50 76 56
-12 95 70 106 78
-16 127 94 141 104
-20 168 124 187 138
-24 212 156 235 173
Do not use thread sealant on SAE hydraulic fittings.
Lubricate O-rings with hydraulic fluid or O-ring lubricant before assembly.
1/16-inch
dash size
Minimum Maximum
N∙m lbf ∙ ft N∙m lbf ∙ ft
-04 14 10 16 12
-06 24 18 27 20
-08 43 32 47 35
-10 62 46 68 50
-12 88 65 95 70
-16 125 92 136 100
-20 169 125 190 140
-24 203 150 224 165
To Next Page
Loading...
