Need help?Do you have a question about the Hyster B60Z and is the answer not in the manual?
General| Model | B60Z |
|---|---|
| Load Capacity | 6000 lbs |
| Power Source | Electric |
| Number of Wheels | 4 |
| Tire Type | Cushion |
| Type | Forklift |
| Category | Industrial Equipment |
| Battery Voltage | 48V |
Explains the function of hydraulic system components and their operation.
Details the process of raising a load using the hydraulic system.
Describes how the hydraulic system lowers a load.
Provides guidelines for hydraulic lines during maintenance.
Discusses the function and importance of hydraulic oil.
Covers essential safety practices for operating and maintaining the equipment.
Outlines steps to ensure the hydraulic system remains clean.
Discusses potential causes of hydraulic system noise.
Describes the hydraulic reservoir and its markings.
Explains how to access the drive unit compartment.
Provides steps to remove the lift pump and motor assembly.
Instructions for disassembling the lift pump and motor.
Details the procedure for removing the hydraulic reservoir.
Steps for removing the pump motor from the assembly.
Instructions for disassembling the pump itself.
Steps for assembling the pump.
Procedures for installing the pump motor.
Steps to install the reservoir onto the pump.
Instructions for installing the entire lift pump and motor assembly.
Procedures for removing and installing the lowering valve.
Steps to remove the relief valve.
Steps to install the relief valve.
Steps to remove the check valve.
Steps to remove the lift cylinder.
Instructions for disassembling the lift cylinder.
Steps for assembling the lift cylinder.
Steps for installing the lift cylinder.
Steps to check the relief valve pressure.
Steps to adjust the relief valve pressure.
Lists problems and solutions for lift assemblies.
Lists problems and solutions for lift cylinders.
Lists problems and solutions for the lift pump and motor.
To Next Page
