Wheel and Tire Replacement 8000 SRM 707
STEP 2.
Put wheel rim on bed of press. Put tire over wheel
rim. Put cage in position on tire. Use press to install
tire on wheel rim.
STEP 3.
Remove cage and put flange seat (if used), side ring,
andlockringinpositiononwheelrim. Installcage
ontire.Usepresstopushtireontowheelrimsoside
flange and lock ring can be installed.
STEP 4.
While the cage is holding the tire on the wheel rim,
install lock ring. Use a tire tool to make sure lock
ring is in the correct position.
70
To Next Page
Loading...
