Hytera DMR System Planner
112
3.4.2 Control
RDAC can control the operation mode and state of the repeater.
Restart the repeater
Input the modified parameters. The following parameters can be modified.
Current channel
The TX power
The state of repeater: to enable or disable the repeater
Knockdown: to enable or disable the retransmitting function.
Reload the current parameters.
Get the current parameters of the repeater to know its operation state.
View RSSI Data
You can know the RSSI from RDAC. By assessing the RSSI, the RADC will take
respective measure to improve telecommunications performance. RADC can
monitor the RSSI in real time.
RDAC Log: RDAC can automatically record the diagnosing and control. The
RDAC can operate on the following items:
View RDAC Log
View diagnosing record
Delete diagnosing record
The alarm report records the alarm information and is available to be viewed.
View alarm report
View Alarm Log
Delete the alarm report: you can delete the alarm record one by one or delete all at a
time.
To Next Page
Loading...
Need help?
General
