Hytera PD78X Series - Telemetry Service (TMP)

Hytera DMR System Planner
85
2.11.6 Telemetry Service (TMP)
The ADK of Hytera telemetry provides a telemetry application system based on
Hytera radio system on PC. PC application system can monitor Hytera radio input
information and also control Hytera radio output information. For example, you can
monitor radio GPIO input information and control GPIO output status. When you
connect the sensor to the radio GPIO port, the radio is able to monitor sensor
changes and send the information to the monitor center by the wireless air interface
which enables the operator in the monitor center to real-time monitor the status in
the system.
Figure 2.11.6-1: Telemetry protocol framework