Hytera DMR System Planner
158
4.7.2 Phone Applications in IP Multi-site Connect Mode
The Phone feature can be used in the IP Multi-site Connect mode. See Figure
below:
Figure 4.7.2-1: Call from Terminal to Phone in IP Multi-site Connect Mode
Figure 47.2-2: Call from Phone to Terminal in IP Multi-site Connect Mode
The procedures and process for using the Phone feature are the same in the IP
Multi-site Connect mode and the local mode. For details, please refer to the section
“4.7.1 Phone Applications in Local Mode”. In the IP Multi-site Connect mode, it is
recommended to connect one repeater to the PSTN gateway only.
To Next Page
Loading...
