Hytera DMR System Planner
123
4.1.2 Further Development Functions in Direct Mode
The mobile radio has available interface for further development in direct mode.
Currently, the data services developed by the third party include GPS, text message,
telemetry, radio control, data transmission and radio registration. The mobile radio
can communicate with the computer via the USB port, and exchange data with other
radios via the air interface. See the figure below.
Figure 2-1 Further Development Feature in Direct Mode
You can use the third-party application to communicate with the radio, to realize
voice call, text message, telemetry, and GPS services.
To be specific, you can connect the mobile radio to the computer, and set the
corresponding parameters, to realize data communication between the mobile radio
and computer. Please note that the data server protocol for the mobile radio is
based on UDP/IP protocol. The third-party application can communicate with the
radio via the mobile radio. The end user might be the portable radio or mobile radio,
while the mobile radio acts as the dispatch station to connect the computer and
terminal.
To Next Page
Loading...
Need help?
General
