Hytera DMR System Planner
116
Set CDCSS code
Service setting:
Group call hang time
Set the duration the radio stays at in_call status after a group call transmission. You
can call back the group directly without contact list selection.
Private Call Hang Time
Set the duration the radio stays at in_call status after a private call transmission. You
can call back the group directly with no ACK and is not necessary to select from
contact list.
Emergency Call Hang Time
Set the duration the repeater reserves the channel after the end of an emergency
call transmission.
Subscriber Inactivity Timer
Set the time period to detect signal when there is no transmitting. When the time
expires, the repeater will enter IDLE status and wait for the next activation.
Multisite Access Management
Set Multisite Access Management
Set start ID/end ID
Set the type of call.
Access Manager
Set start ID/end ID