User Controls
28
4.2. On-screen Display Menus
The Projector had multilingual On-screen Display menus that allow you to make image adjustments
and change a variety of settings.
A) How to operate?
1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad.
2. When OSD is displayed, use the keys to select any item in the main menu. While
making a selection on a particular page, press the or “Enter”
key to enter sub menu.
3. Use the keys to select the desired item and adjust the settings using the key.
4. Select the next item to be adjusted in the sub menu and adjust as described above.
5. Press “Enter” to confirm, and the screen will return to the main menu.
6. To exit, press “Menu” again. The OSD menu will close and the projector will automatically save
the new settings.
To Next Page
Loading...