i3-TECHNOLOGIES L3503W - User Controls; Control Panel and Remote Control

User Controls
4. User Controls
4.1. Control panel and Remote Control
A) Control Panel
Using the Control Panel
POWER
Refer to the
“Power On/Off the
Projector” section.
Enter Press “Enter” to confirm your item selection.
INPUT Press “INPUT” to select an input signal.
MENU
Press “MENU” to launch the on-screen display
(OSD) menu. To exit OSD, press “MENU” again.
Four Directional
Select Keys
Use to select items or
make adjustments to your selection.
LAMP LED
Refer to the LED indicator of the projector
light source status.
TEMP LED
Refer to the LED indicator of the projector
temperature status.
ON/STANDBY
LED
Refer to the LED indicator of the projector
power status.