User Controls
34
Volume
• Press the ◄ button to decrease the volume.
• Press the ► button to increase the volume.
Microphone Volume
• Press the ◄ button to decrease the microphone volume.
• Press the ► button to increase the microphone volume.
F) Options
Logo
Use this function to set the desired startup screen. If changes are made they will take effect the next
time the projector is powered on.
• Default: The default startup screen.
• User: Use stored picture from “Logo Capture” function.
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Note:
• For successful logo capture, please ensure that the on-screen image does not exceed the
projector’s native resolution (WXGA:1280x800).
• “Logo capture” is not available when 3D is enabled.
• Before activating this function, it is recommended that “Aspect Radio” is set to “Auto”-mode.
Auto Source
• On: The projector will search for other signals if the current input signal is lost.
• Off: The projector will only search current input connection.
To Next Page
Loading...
Need help?
General