User Controls
C) Screen
Aspect Ratio
• Auto: Keep the image with original width-height ratio and maximize the image to fit native
horizontal or vertical pixels.
• 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio.
• 16:9: The image will be scaled to fit the height of the screen and the width adjusted to display
the image using a 16:9 ratio.
• 16:10: The image will be scaled to fit the height of the screen and the width adjusted to display
the image using a 16:10 ratio. (only for SSI WXGA).
• UWHD: The image will be scaled to fit the height of the screen and the width adjusted to display
the image using a 16:6 ratio (only for Ultrawide).
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable
or flickers, use this function to correct it.
Clock
Adjust to achieve an optimal image when there is a vertical flicker in the image.
H. Position
• Press the ◄ button to move the image left.
• Press the ► button to move the image right.
V. Position
• Press the ◄ button to move the image down.
• Press the ► button to move the image up.
Note: “H. Position” and “V. Position” ranges will depend on input source.
Digital Zoom
• Press the ◄ button to reduce the size of an image.
• Press the ► button to magnify an image on the projection screen.
V Keystone
Press the ◄ or ► button to adjust image distortion vertically. If the image looks trapezoidal, this option
can help make the image rectangular.
To Next Page
Loading...
Need help?
General