IAME MINI SWIFT 60CC - USA - 3.8 Electrical Connections on the Engine (Continued); Verify Battery Connection; 3.9 Install the Intake Silencer; Position Intake Silencer

14
MAN-85 – USA
3.8.13 MAKE SURE THAT THE BATTERY IS
PROPERLY CONNECTED BEFORE
STARTING THE ENGINE. (SEE FIG. 36).
3.9
INSTALL THE INTAKE SILENCER
- MAKE SURE THAT THE AIR FILTER
HAS THE INLET HOLE TOWARDS
UPPER SIDE AND THAT IT IS NOT
PLUGGED.
- TIGHTEN THE FIXING CLAMP ON THE
CARB. AND FIX THE FILTER BY MEANS
OF THE PROPER CLAMP ON THE
CHASSIS RAIL
(SEE FIG. 37-38).
3.10
INSTALL THE EXHAUST SYSTEM
INSTALL THE EXHAUST MUFFLER ON THE
FITTING AND SECURE IT WITH THE 2
SPRINGS. (SEE FIG. 39).
NOTE:
ON THE “BABY” VERSION, THE MUFFLER
IS DIRECTLY POSITIONED ON THE
CYLINDER WITHOUT ANY INTERMEDIATE
FITTING
ENGINE IS READY TO BE STARTED
Fig.37
Fig.36
Fig.38
Fig.39